![]() Together, daliDongle and DMX-Workshop provide a powerful analysis and configuration tool for DALI networks. In case you would like to control LEC POWERED over Art-Net or DMX, you can also use third-party hardware and software. Artistic Licence daliDongle daliDongle is a USB-to-DALI converter, designed to work in conjunction with the free Artistic Licence software application, DMX-Workshop. LED Strip Studio software lifetime license is included with every LED Ethernet Controller POWERED. You can also find a DIP switch and buttons for control in stand-alone mode. An optimal SD card is Micro SD Card ( FAT32, up to 32GB). A factory reset switch enables the default settings to be restored - simply hold down and cycle the power. All four DALI circuits are individually optically isolated. It is strongly recommended that the firmware upgrade be applied to all output ports (check the ‘Tick All’ box in the next window). Selection of the desired file is made via a pop-up window that shows the available files. DHCP and LLRP are supported for automatic IP addressing. DMX-Workshop stores the firmware files in C:Program FilesArtistic LicenceDMX-WorkshopFirmware as e.g. ![]() Ethernet is 2 x RJ-45 connector, an internal switch, 100 Mbit/sec. or DMX-Workshop (free-of-charge software available from Artistic Licence). ![]() Shutdown any applications running on your computer Insert the CD in drive. To install use the following procedure: If you are upgrading, first uninstall the existing copy of DMX-Workshop. DMX input/output connector is XLR 3-pin connector (optional 5 pin). DMX-Dongle User’s Guide 10 Software Installation DMX-Workshop is supplied on CD. To download DMX-Workshop, please complete the brief registration form. DMX Workshop Tutorial 3 Updating firmware in an Artistic Licence product. It is also the reference against which all Art-Net implementations should be tested. SPI out connector is standard 4 pin terminal with 5 mm contact spacing e.g. You could have downloaded DMX-Workshop 4.109 from our software library for free. Description DMX-Workshop is a software package (developed by and copyright Singularity (UK) Ltd) for lighting network management, analysis, configuration and diagnostics. Power in/out connector is PowerCON connector, 230V/20A max. Show programming is then performed using colour. The lighting array is entered using a sophisticated graphic user interface. Colour-Tramp combines the concept of lighting control with a graphic editor. The required input is 88 ~ 264 VAC/47 ~ 63Hz (360W, without the LED strips) and output power is 5V/ 10A (per SPI output). Colour-Tramp is a lighting control system specifically designed to handle the complexity of two and three dimensional lighting arrays. Maximum of programmable RGB / RGBW LEDs is 4096 RGB / 3072 RGBW LEDs. LED Ethernet Controller Powered can be controlled by LED Strip Studio software, Art-Net (24 full Art-net universes maximal), DMX or can be operated in stand-alone mode.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |